Explorer Sport Trac 4WD V8-4.6L (2008)
3. Using a new crankshaft pulley bolt, install the bolt and washer and tighten the bolt in 4 stages.
^
Stage 1: Tighten to 90 Nm (66 lb-ft).
^
Stage 2: Loosen 360 degrees.
^
Stage 3: Tighten to 50 Nm (37 lb-ft).
^
Stage 4: Tighten an additional 90 degrees.
4. Install the accessory drive belt.
5. Install the cooling fan shroud.
