Explorer Sport Trac 4WD V8-4.6L (2008)
Intake Air System Components - 4.6L (3V)
Exploded View
Removal and Installation
NOTE: Do not disconnect the mass air flow (MAF) sensor electrical connector.
Vehicles equipped with a 4.0L (SOHC) engine
1. Detach the wiring harness retainer from the air cleaner (ACL) outlet pipe.
Vehicles equipped with a 4.6L (3V) engine
2. Detach the wiring harness retainer from the coolant expansion tank.
All vehicles
3. Loosen the clamp and disconnect the ACL outlet pipe from the ACL.
4. Unclip and remove the ACL cover.
5. Remove the ACL.
6. NOTE: Clean the inside of the ACL tray.
To install, reverse the removal procedure.
