Explorer Sport Trac 4WD V8-4.6L (2008)
4. Install a tie strap in between the Suppressor and the wiring harness. (Figure 5)
5. Tuck the suppressor behind the IC plastic support bracket and secure the tie strap around the instrument cluster bracket. (Figure 6)
6. Install the IC. Refer to WSM, Section 413-01.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
100215A
2006-2010 Explorer, 0.7 Hr.
Mountaineer 2007-2010
Explorer Sport Trac: Install
Suppressor, Includes Time
To Remove And Install
The Instrument Cluster (Do
Not Use With Any Other
Labor Operations)
DEALER CODING
CONDITION
BASIC PART NO.
CODE
10849
42
Disclaimer
