Explorer Sport Trac 4WD V8-4.6L (2008)
28. Attach the restraint system diagnostic tool to the vehicle harness side of the driver seat side air bag module electrical connector.
29. Install the RCM fuse 17 (10A) to the SJB.
30. Connect the battery ground cable.
Reactivation
All vehicles
1. Remove the RCM fuse 17 (10A) from the SJB.
2. Disconnect the battery ground cable and wait at least one minute.
3. Remove the restraint system diagnostic tool from the vehicle harness side of the driver seat side air bag module electrical connector.
4. Connect the driver seat side air bag module electrical connector and then slide and engage the seat side air bag electrical connector locking clip.
Explorer Sport Trac vehicles
