Explorer Sport Trac 4WD V8-4.6L (2008)
-
Never put any type of fastener or tie strap around any part of a safety canopy module, side air curtain module or interior trim panel. This will
prevent the safety canopy or side air curtain module from deploying correctly. Failure to follow this instruction may increase the risk of serious
personal injury or death in a crash.
-
Always use new torque-prevailing type J-nuts when installing the safety canopy in the vehicle. Use of these J-nuts is mandatory to reduce the
risk of loss of fastener effectiveness. Failure to follow this instruction may result in the safety canopy module deploying incorrectly and
increases the risk of serious personal injury or death in a crash.
All vehicles
1. Remove the front 4 J-nuts and install new.
2. Remove the rear 4 J-nuts and install new.
3. Position the safety canopy module by moving it rearward, installing the rear bracket hook in the sheet metal.
4. Install the safety canopy module B-pillar bracket hook in the sheet metal.
