ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Alignment|Service and Repair > < Alignment Specifications|Page 6926
Page 2
background image

Positive Toe (Toe In)

Negative Toe (Toe Out)

The vehicle toe setting:
^

affects tire wear and directional stability.

^

must be checked after adding aftermarket equipment, such as a snowplow.

Wander

Wander is the tendency of the vehicle to require frequent, random left and right steering wheel corrections to maintain a straight path down a level
road.

 
Shimmy

Shimmy, as observed by the driver, is large, consistent, rotational oscillations of the steering wheel resulting from large, side-to-side (lateral)
tire/wheel movements.

Shimmy is usually experienced near 64 km/h (40 mph), and can begin or be amplified when the tire contacts pot holes or irregularities in the road
surface.

Nibble

Sometimes confused with shimmy, nibble is a condition resulting from tire interaction with various road surfaces and observed by the driver as small
rotational oscillations of the steering wheel.

Poor Returnability/Sticky Steering

Poor returnability and sticky steering is used to describe the poor return of the steering wheel to center after a turn or the steering correction is
completed.

Drift/Pull

Pull is a tugging sensation, felt by the hands on the steering wheel, that must be overcome to keep the vehicle going straight.

Drift describes what a vehicle with this condition does with hands off the steering wheel.
^

A vehicle-related drift/pull, on a flat road, will cause a consistent deviation from the straight-ahead path and require constant steering input in the
opposite direction to counteract the effect.

^

Drift/pull may be induced by conditions external to the vehicle, such as wind or road camber.

Alignment|Service and Repair > < Alignment Specifications|Page 6926