Explorer Sport Trac 4WD V8-4.6L (2008)
10. Open and lower the glove compartment door.
11. Detach the wiring retainer, remove the 4 bolts and the passenger air bag module heat shield.
12. NOTE: Deactivate the passenger air bag module as shown, the canister vent and adaptive tether squibs do not require deactivation.
Through the glove compartment opening, disconnect the LH side passenger air bag module electrical connector.
13. Attach the restraint system diagnostic tool to the vehicle harness side of the passenger air bag module electrical connector on the LH side.
14. From under the rear of the passenger seat, detach the passenger seat side air bag module electrical connector from the seat track bracket. Then
slide and disengage the passenger seat side air bag module electrical connector locking clip, and then release the tab and disconnect the passenger
seat side air bag module electrical connector.
