Explorer Sport Trac 4WD V8-4.6L (2008)
5. Hang the special tool under the vehicle, upright and close to the transmission.
6. Connect the special tools.
^
Connect the open end of the fluid hose from the Fluid Transporter/Evacuator/Injector to the Fluid Level and Fill Plug Adapter at the bottom of
the transmission fluid pan.
7. Apply a maximum of 206.85 kPa (30 psi) to the open end of the vacuum/pressure hose from the special tool. Transmission fluid will immediately
start flowing out of the special tool into the transmission fluid pan.
