Explorer Sport Trac 4WD V8-4.6L (2008)
5. Wipe the transmission fluid level indicator clean. Reinstall the transmission fluid level indicator only back into the transmission fluid fill plug hole
to check the transmission fluid level.
6. Using the scan tool, verify that the transmission fluid temperature is between 80° C-85° C (175° F-185° F). Do not overfill the transmission. The
transmission fluid level must be at the upper level of the crosshatch mark.
7. NOTE: If the transmission fluid is not at the correct level, follow the steps for Adding Additional Transmission Fluid or Removing Transmission
Fluid.
Install the transmission fluid fill plug.
^
Tighten to 35 Nm (26 lb-ft).
