ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Recall - A/T Cooler Line Leakage/Fire Potential|Page 5008 > < Recall - A/T Cooler Line Leakage/Fire Potential|Page 5006
Page 3
background image

If a condition exists that requires additional labor to complete the repair, call the Special Service Support Center to request approval prior to performing
any additional labor. Requests for approval after completion of the repair will not be granted.

OWNER REFUNDS

Refunds are not authorized for this program.

RENTAL VEHICLES

The use of rental vehicles is not authorized for this program.

CLAIMS PREPARATION AND SUBMISSION

^

Enter claims using Direct Warranty Entry (DWE).

^

Related damage must be claimed on a repair line that is separate from the repair line on which the FSA is claimed. Related damage requires prior
approval from Special Service Support Center.

^

"MT" labor should be submitted on a separate repair line with the related damage flag checked. "MT" labor requires approval from Special Service
Support Center. Refer to ACESII manual for claims preparation and submission information.

Attachment II - Labor and Parts Information

LABOR ALLOWANCES

PARTS REQUIREMENTS / ORDERING INFORMATION

Parts are not required for this repair.

Attachment III - Technical Information

1.

Lift vehicle and locate the transmission fluid cooler line attachment bolt on the left side of the transmission. (See illustration.)

NOTE:

If cooler lines are leaking transmission fluid at the transmission attachment point, call Special Service Support Center.

Recall - A/T Cooler Line Leakage/Fire Potential|Page 5008 > < Recall - A/T Cooler Line Leakage/Fire Potential|Page 5006