Explorer Sport Trac 4WD V8-4.6L (2008)
5. NOTE: Crossmember and exhaust system shown removed.
NOTE: LH shown, RH similar.
Remove the 2 transmission support insulator bolts.
6. Raise the transmission and remove the transmission support insulator.
Installation
1. Install the transmission support insulator and the 2 transmission support insulator bolts.
^
Tighten to 90 Nm (66 lb-ft).
2. Lower the transmission and install the 2 transmission support insulator nuts.
^
Tighten to 90 Nm (66 lb-ft).
