Explorer Sport Trac 4WD V8-4.6L (2008)
5. Tighten the mechatronic bolts in the sequence shown.
^
Tighten to 6 Nm (53 lb-inch).
6. CAUTION: Do not touch the electrical connector pins or the exposed solenoid tabs on the transmission control module (TCM).
Electrostatic discharge may occur and may cause damage to the mechatronic unit.
With the release tab down and unlocked, push the outer shell of the bulkhead electrical connector into the transmission. Make sure that the
bulkhead connector is fully seated into the TCM.
7. Press up on the tab and lock the outer shell of the bulkhead electrical connector in place. Make sure that the locking tab is securely locked.
