Explorer Sport Trac 4WD V8-4.6L (2008)
Place the stub shaft pilot bearing onto the special tools.
3. Install the stub shaft pilot bearing into the rear axle housing bore.
4. NOTE: Do not disassemble the new oil seal.
NOTE: Use a tool like the Lisle LIS 17850 to avoid interference with the suspension components.
Install the stub shaft pilot bearing oil seal onto a suitable seal installer.
5. Carefully align the stub shaft pilot bearing oil seal with the housing bore and install the stub shaft pilot bearing oil seal flush in the differential
housing.
6. Install the halfshaft assembly.
Dana 30 Front Drive Axle/Differential
Stub Shaft Pilot Bearing and Seal