Explorer Sport Trac 4WD V8-4.6L (2008)
WARNING: Carefully read cautionary information on product label. For EMERGENCY MEDICAL INFORMATION seek medical
advice. Failure to follow these instructions may result in serious personal injury.
NOTE: If necessary, drain the windshield washer reservoir after removal.
6. Disconnect the windshield washer reservoir hoses.
7. Remove the top bolt.
-
To install, tighten to 5 Nm (44 lb-in).
8. Remove the side bolt.
-
To install, tighten to 5 Nm (44 lb-in).
9. Remove the bolt.
