Explorer Sport Trac 4WD V8-4.6L VIN 8 (2007)
Mountaineer
Exploded Views
Removal and Installation
Explorer
1. Remove the headlamp assemblies.
All vehicles
2. Disconnect the fog lamp electrical connectors, if equipped.
3. Disconnect the side turn signal lamp electrical connectors, if equipped.
4. Remove the front fender inner splash shield screws.
5. Remove the front fender inner splash shield pin-type retainers.
6. Remove the front fender inner splash shields.
7. Remove the 2 bolts from the bottom of the bumper cover.
Explorer
8. Remove the 6 grille-to-grille opening panel scrivets.
NOTE: The fender clips are removed with the front fender. Use a flat-blade screwdriver to release the locking tabs from the front bumper cover.