Explorer Sport Trac 4WD V8-4.6L VIN 8 (2007)
Hood Latch: Service and Repair
HOOD LATCH
Removal and Installation
NOTE: Mark the position of the hood latch prior to removing the hood latch bolts to aid positioning during installation.
1. Remove the 2 hood latch bolts.
-
To install, tighten to 12 Nm (9 lb-ft).
2. Disconnect the hood latch release cable from the hood latch and remove the latch.
3. To install, reverse the removal procedure.
-
Check the latch adjustment to make sure the latch was installed and aligned correctly.
-
Lubricate the hood latch after installation.