Explorer Sport Trac 4WD V8-4.6L VIN 8 (2007)
Trunk / Liftgate Latch: Service and Repair
Liftgate Window Latch
LIFTGATE WINDOW LATCH
Removal and Installation
1. Remove the liftgate trim panel.
2. Position the watershield aside.
3. Disconnect the liftgate window actuator and liftgate window ajar switch electrical connectors.
4. Remove the 4 screws and the liftgate window latch.
-
To install, tighten to 12 Nm (9 lb-ft).
5. To install, reverse the removal procedure.
-
Lubricate the liftgate window latch after installation.