Explorer Sport Trac 4WD V8-4.6L VIN 8 (2007)
1. Remove the rear cargo management system.
-
Remove the screw.
-
Remove the pushpin.
-
Remove the system.
2. Remove the D-pillar lower safety belt anchor bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
All vehicles
3. Position the liftgate opening weatherstrip aside.
4. Remove the rear upper headliner trim panel.
5. Remove the D-pillar trim panel.
6. To install, reverse the removal procedure.
Quarter Trim Panel
QUARTER TRIM PANEL