ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Seat Backrest Cover - Front|Page 8923 > < Seat Backrest Cover - Front|Page 8921
Page 7
background image

Passenger Seat Cushion (Part 2)

Exploded View

Removal and Installation

WARNING:

-

Always wear safety glasses when repairing an air bag supplemental restraint system (SRS) vehicle and when handling an air bag module.
This will reduce the risk of injury in the event of an accidental deployment.

-

To reduce the risk of personal injury, do not use any memory saver devices.

NOTE:

-

If a seat equipped with a supplemental restraint system (SRS) component is being serviced, the SRS must be depowered.

-

The air bag warning lamp illuminates when the RCM fuse is removed and the ignition switch is ON. This is normal operation and does not indicate
a supplemental restraint system (SRS) fault.

-

The SRS must be fully operational and free of faults before releasing the vehicle to the customer.

All seats

1. Remove the front seat and depower the supplemental restraint system (SRS).
2. Remove the cushion side shield.

Seat Backrest Cover - Front|Page 8923 > < Seat Backrest Cover - Front|Page 8921