Explorer Sport Trac 4WD V8-4.6L VIN 8 (2007)
All seats
1. Remove the front seat and depower the supplemental restraint system (SRS).
2. Remove the seat track.
3. Remove the front seat backrest.
4. CAUTION: Use care when separating the seat back trim cover from the hook-and-loop strip, or the hook-and-loop strip can be torn
from the backrest foam pad.
Release the hook-and-loop strips, remove the hog rings and separate the cushion trim cover from the cushion foam pad.
Seat with heat
5. If necessary, remove the cushion heated seat mat and route out the wire harness through the cushion foam pad opening.
All seats
6. To assemble, reverse the disassembly procedure.
7. Install the front seat backrest.
8. Install the seat track.
9. Install the front seat and repower the SRS. If a passenger seat has been serviced, do not prove out the SRS at this time.
Passenger seat
10. Carry out the Occupant Classification Sensor (OCS) System Zero Seat Weight Test and prove out the SRS.
Seat Cushion - Second Row, 40 Percent E-Z Entry
SEAT CUSHION - SECOND ROW, 40 PERCENT E-Z ENTRY
