Explorer Sport Trac 4WD V8-4.6L VIN 8 (2007)
17. Release the tab and slide the latch feet retracting link retainer back.
18. Release the tab and remove the latch feet retracting link from the kneeling mechanism.
19. NOTE: Note the routing of the cable for installation.
Separate the cable to the kneeling mechanism inboard leg and cushion frame.
1. Turn and separate the cable casing retainer at the inboard side of the kneeling mechanism inboard leg.
2. Separate the cable from the kneeling mechanism inboard leg release lever.
-
Remove the cable casing retainers from the cushion frame.
20. Remove the 2 screws and the 2 latch foot covers.
21. Separate the cable and casing from the outboard latch foot, cushion support springs and remove the cable assembly.
22. Through the opening in the cushion frame, remove the recliner release shaft.
23. NOTE: Note the routing of the cable for installation.
Separate the kneeling mechanism cable pivot at the inboard recliner.
