Explorer Sport Trac 4WD V8-4.6L VIN 8 (2007)
Part 2
Exploded View
Removal and Installation
1. Remove the side compartment lid.
2. NOTE: The storage compartment seal is installed over the hinge assembly.
Remove the storage compartment seal from the storage compartment.
-
Remove any adhesive or residual seal material.
-
Clean the lid surface with a 50/50 solution of alcohol and water.
-
Apply adhesive promotor.
-
Apply seal.
-
Apply pressure to the seal with a roller and allow seal to cure before installation for one hour.
3. To install, reverse the removal procedure.
