ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Procedures|Page 5707 > < Procedures
Page 1
background image

Hydraulic Control Assembly - Antilock Brakes: Removal and Replacement

Hydraulic Control Unit (HCU) 

Material

Removal and Installation 

WARNING:  Use of any other than approved DOT 3 brake fluid will cause permanent damage to brake components and will render the brakes
inoperative. Failure to follow these instructions may result in personal injury.
 

WARNING:  Carefully read cautionary information on product label. For EMERGENCY MEDICAL INFORMATION seek medical advice.
In the USA or Canada on Ford/Motorcraft products call: 1-800-959-3673. For additional information, consult the product Material Safety
Data Sheet (MSDS) if available. Failure to follow these instructions may result in personal injury.
 

CAUTION:  Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash
it with water.

Procedures|Page 5707 > < Procedures