ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Caliper removal and installation, Front|Page 5969 > < Brakes - Rear Brake Rattling Noise Over Bumps|Page 5966
Page 1
background image

Brake Caliper: Service and Repair
Caliper removal and installation, Front

Brake Caliper

Material

Removal 

WARNING:  Use of any other than approved DOT 3 motor vehicle brake fluid will cause permanent damage to brake components and will
render the brakes inoperative. Failure to follow these instructions may result in personal injury.
 

WARNING:  Carefully read cautionary information on product label. For EMERGENCY MEDICAL INFORMATION seek medical advice.
In the USA or Canada on Ford/Motorcraft products call: 1-800-959-3673. For additional information, consult the product Material Safety
Data Sheet (MSDS) if available. Failure to follow these instructions may result in personal injury.
 

CAUTION:  Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash
it with water.

1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair
2. Remove the brake hose flow bolt and position the brake hose aside.

^

Discard the 2 copper washers.

Caliper removal and installation, Front|Page 5969 > < Brakes - Rear Brake Rattling Noise Over Bumps|Page 5966