Explorer Sport Trac 4WD V8-4.6L VIN 8 (2007)
^
Cap the fluid ports.
3. CAUTION: Do not pry in the brake caliper sight hole to retract the pistons as this can damage the pistons and boots.
Remove the 2 brake caliper guide pin bolts and the brake caliper.
^
If leaks or damaged boots are found, install a new brake caliper.
Installation
1. CAUTION: Tighten the bottom locator pin brake caliper bolt before tightening the top guide pin brake caliper bolt.
Position the brake caliper and install the 2 guide pin bolts.
^
Tighten to 72 Nm (53 ft. lbs.).
2. Using 2 new copper washers, position the brake hose and install the brake hose flow bolt.
^
Tighten to 35 Nm (26 ft. lbs.).
3. Bleed the brake caliper.
4. Test the brake system for normal operation.
