Explorer Sport Trac 4WD V8-4.6L VIN 8 (2007)
Parking Brake Cable: Service and Repair
Parking Brake Cable - Rear, LH
Parking Brake Cable - Rear, LH
Paring Brake Cable - Rear, LH
Removal and Installation
1. Release the parking brake cable tension.
2. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair
3. Remove the 2 wire form bolts.
^
To install, tighten to 15 Nm (11 ft. lbs.).
4. Disconnect the intermediate cable from the LH rear cable at the cable equalizer.
