Explorer Sport Trac 4WD V8-4.6L VIN 8 (2007)
7. While driving the vehicle, use the scan tool to verify that the transmission fluid temperature has reached a temperature of 88°C (190°F). This will
circulate the transmission fluid through the torque converter and the cooling system, eliminating any trapped air in the cooling system.
^
With the engine idling (600 - 750 rpm) in PARK, verify that the transmission fluid temperature is between 80°C - 85°C (175°F - 185°F).
8. Remove the fluid fill plug fluid level indicator assembly located on the passenger side front portion of the transmission case.
9. Separate the fluid level indicator from the fill plug.
10. Wipe the fluid level indicator clean. Reinstall the fluid level indicator only back into the fill plug hole to check the fluid level. Repeat this until a
consistent reading is established.
11. Using the scan tool verify that the transmission fluid temperature is between 80°C - 85°C (175°F - 185°F). The fluid level must be at the upper
level of the crosshatch mark.
