Explorer Sport Trac 4WD V8-4.6L VIN 8 (2007)
12. NOTE: If the transmission fluid is not at the correct level, follow the steps for Adding Additional Transmission Fluid or Removing Transmission
Fluid in this procedure.
Install the fluid fill plug.
^
Tighten to 35 Nm (26 ft. lbs.)
Adding Additional Transmission Fluid
NOTE: To get an accurate fluid level reading the engine should be idling (600 - 750 rpm) in PARK.
1. Install the special tool into the fluid fill hole.
2. Fill the special tool with approximately 0.47L (1 pt) of clean automatic transmission fluid.
3. Hang the special tool under the vehicle, upright and close to the transmission.
