Explorer Sport Trac 4WD V8-4.6L VIN 8 (2007)
3. Disconnect the safety clip from the fuel tube.
4. Install the special tool and press it into the spring lock coupling.
5. Separate the spring lock coupling.
Connect - Type I
1. Inspect and clean both spring lock coupling ends.
2. CAUTION: Make sure the fuel tube clicks into place when installing the tube. To make sure that the fuel tube is fully seated, pull on the
tube.
NOTE: Lubricate the spring lock coupling with clean engine oil.
Align the fuel tube spring lock coupling and push together until a click is heard.