Explorer Sport Trac 4WD V8-4.6L VIN 8 (2007)
Installation
CAUTION: Inspect the pulley for paint marks in the web area near the hub. If there are 2 paint marks, discard the pulley. If there is no
paint or one paint mark, use a paint pencil to mark the web area of the pulley near the hub.
CAUTION: Installation of a new power steering pump pulley is necessary after being removed and installed 2 times.
1. Using the special tool, install the pulley.
2. Rotate the tensioner and install the engine accessory drive belt on the power steering pump pulley. For additional information on accessory drive
belt routing, refer to Drive Belts, Mounts, Brackets and Accessories.
3. Install the engine air cleaner outlet pipe. For additional information, refer to Fuel Delivery and Air Induction.