Explorer Sport Trac 4WD V8-4.6L VIN 8 (2007)
Transfer Case Actuator: Service and Repair
Transfer Case Shift Motor
Material
Removal and Installation
1. With the ignition ON, press the 4x4 HIGH button on the mode select switch (MSS).
2. With the transmission in the NEUTRAL position, raise and support the vehicle. For additional information, refer to Maintenance/Service and
Repair.
3. Disconnect the transfer case shift motor harness connector.
4. Remove the bracket bolt and transfer case shift motor mounting bolts and remove the transfer case shift motor.
5. To install, reverse the removal procedure.
^
Apply a coat of Multi-Purpose Grease to the transfer case shift motor bolts.
^
Tighten to 10 Nm (89 inch lbs.)
