Explorer Sport Trac 4WD V8-4.6L VIN 8 (2007)
3. NOTE: Inspect the transmission case to make sure that the old O-rings are not stuck in the transmission case.
Position the transmission fluid cooler tubes into the transmission, then install the bolt for the transmission cooler tube retainer.
^
Tighten to 25 Nm (18 ft. lbs.)
4. Install the transmission fluid cooler tube bracket and install the transmission fluid cooler tube bracket nut.
^
Tighten to 12 Nm (9 ft. lbs.)
5. NOTE: Install new universal joint strap bolts. If new universal joint strap bolts are not available, coat the threads of the original universal joint
strap bolts with Threadlock and sealer.
If removed, install the universal joint straps and 4 new universal joint strap bolts.
^
Tighten to 19 Nm (14 ft. lbs.)
6. Connect the engine oil level sensor electrical connector.