Explorer Sport Trac 4WD V8-4.6L VIN 8 (2007)
11. Disconnect the selector lever cable from the bracket and remove the cable.
Installation
Vehicles equipped with a 6R60 transmission
NOTE: When installing the selector lever cable, make sure that the selector lever cable locking tabs are locked in place and the cable end is snapped
onto the ball stud. Press the selector lever cable into the bracket and listen for the cable to click in place. Pull back on the selector lever cable to make
sure that it is locked into the bracket. Also make sure that the selector lever cable end is correctly installed onto the ball stud. Pull back on the selector
lever cable end to make sure that the cable end is correctly installed.
1. Install the selector lever cable into the bracket.
2. Connect the selector lever cable end onto the transmission manual lever and lock the lock tab.
