ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Removal and Replacement|Page 4910 > < Removal and Replacement|Page 4908
Page 6
background image

Mechatronic Lower Half (Part 3)

Check Ball Location

Disassembly

CAUTION:  Do not touch the electrical connector pins or the exposed solenoid tabs on the transmission control module (TCM). An
electrostatic discharge may occur and may cause damage to the TCM/Mechatronic assembly.

NOTE:  Make an identifying mark on each solenoid and the corresponding bore for correct assembly.

NOTE:  Solenoids may visually appear the same but their designs/functions are different. Caution must be taken not to assemble the Mechatronics
assembly incorrectly. Incorrect solenoid installation will result in poor transmission shift quality.

Removal and Replacement|Page 4910 > < Removal and Replacement|Page 4908