ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Output Shaft, Differential > < Fluid - Differential|Capacity Specifications|Page 4944
Page 1
background image

Fluid - Differential: Service and Repair

Rear Drive Axle/Differential - Ford 8.8-Inch Ring Gear

Differential Draining and Filling

Special Tool(s)

Material

Fluid Check

 

1. NOTE:  Before removing, clean the area around the filler plug.

Remove the fill plug.

Fluid Drain and Fill 

1. Remove the drain plug.
2. Clean and install the drain plug.

^

Tighten to 34 Nm (25 ft. lbs.) 

3. Fill the axle to the bottom of the fill plug hole.
4. Install the fill plug.

^

Tighten to 34 Nm (25 ft. lbs.)

Output Shaft, Differential > < Fluid - Differential|Capacity Specifications|Page 4944