Explorer Sport Trac 4WD V8-4.6L VIN 8 (2007)
7. Install the disc brake caliper and disc brake caliper anchor as an assembly, then the disc brake caliper anchor bolts.
^
Tighten to 108 Nm (80 ft. lbs.)
8. CAUTION: Always connect the front driveshaft to the axle first. Otherwise, the weight of the driveshaft can pinch the boot between the
shaft and the flange and cause the boot to tear.
CAUTION: Install the driveshaft with new bolts and washers and new bolts and universal joint retainers. If new bolts are not available,
coat the threads of the original bolts with Threadlock and sealer.
Install the front driveshaft.
9. Install the front tires and wheels.
