F 100 2WD Pickup V8-302 5.0L (1983)
Figure 28 - Repair Procedure
5.
Position the 375 watt heat lamp 305 mm (12 inches) from the repair and allow the repair to cure for two hours (Figure 28).
CAUTION: Do not position the heat lamp closer to the repair area than 305 mm (12 inches). Do not use a heat gun or overheat the repair material.
Figure 22 - LOCKING TYPE PLIERS
6.
Leak test the repair by clamping the tank to the header with No. 200 crimp clamps or equivalent (Figure 22).
7.
After a successful leak test, install the radiator tank as outlined.
Oil Cooler Transfer or Replacement - Removal
1.
Remove the outlet tank from the radiator as outlined.