F 150 2WD V6-3.5L Turbo (2011)
Oil Filter: Technical Service Bulletins
Engine - Oil Filter Information
TSB 11-3-28
03/31/11
3.5L GTDI - SERVICE OIL FILTER INFORMATION
FORD:
2011 F-150
ISSUE
All 2011 F-150 vehicles equipped with a 3.5L gasoline turbocharged direct injection (GTDI) engine were produced with a Motorcraft(R) FL-500 type
oil filter. A new replacement oil filter Motorcraft(R) FL-2055 is now released.
ACTION
Follow Service Procedure to correct this condition.
SERVICE PROCEDURE
Follow Workshop Manual; 303-01 to replace engine oil filter. The oil capacity for the 3.5L GTDI engine with the Motorcraft(R) FL-2055 oil filter is
5.9L (6.2 quarts). The vehicle was produced with a small diameter 77 mm (3") oil filter, Motorcraft(R) FL-500.
The service replacement oil filter Motorcraft(R) FL-2055 is a larger diameter 94 mm (3.75") filter. The Motorcraft(R) FL-2055 has significantly higher
filtration efficiency and capacity than most other oil filters and is designed for added engine protection and long life. For proper engine maintenance, an
Motorcraft(R) FL-2055 oil filter, or an equivalent filter meeting Ford Motor Company material and design specifications, must be used. If a replacement
oil filter is installed that does not meet Ford Motor Company specifications, engine damage may occur which may not be eligible for warranty coverage.
Parts Block
WARRANTY STATUS: Information Only
Disclaimer