F 150 2WD V8-4.6L (2008)
Keyless Entry Transmitter: Procedures
Remote Memory Activation
REMOTE MEMORY ACTIVATION
1. Position the driver seat and pedals to the desired position.
2. Press the set button on the memory set switch.
3. Within 5 seconds, press the 1 or 2 button on the memory set switch. This stores the configuration for driver 1 or driver 2.
4. Press the set button.
5. Within 5 seconds, press any button on the remote keyless entry (RKE) transmitter and then press the 1 or 2 button on the driver door panel to
associate the RKE transmitter with position.
6. If a second memory setting is desired, repeat the procedure with the second RKE transmitter.
Remote Memory Deactivation
REMOTE MEMORY DEACTIVATION
1. Press the set button on the memory set switch.
2. Within 5 seconds, press any button on the remote keyless entry (RKE) transmitter that you wish to deactivate and then press the set button on the
memory set switch.
3. If a second memory setting desired to be deactivated, repeat the procedure with the second RKE transmitter.
