F 150 2WD V8-4.6L (2008)
Part 2
Removal and Installation
1. Remove the rear door trim panel.
2. Position the watershield aside.
3. Remove the 3 rear door latch bolts.
-
To install, tighten to 12 Nm (106 lb-in).
4. Open the clip and disconnect the exterior rear door handle actuating rod.
5. Position the rear door latch aside.
6. Disconnect the 2 rear door latch electrical connectors and remove the rear door latch.
7. To install, reverse the removal procedure.
-
Lubricate the rear door latch after installation.