F 150 2WD V8-4.6L (2008)
4. Tighten the bolts in 3 stages in the sequence shown.
^
Stage 1: Tighten to 2 Nm (18 lb-in).
^
Stage 2: Tighten to 20 Nm (15 lb-ft).
^
Stage 3: Tighten an additional 60 degrees.
4WD vehicles
5. Position the front axle.
6. NOTE: Rotate the steering column so the pinch bolt for the steering column coupling allows clearance for the isolator bolt.
Install the upper front axle carrier mounting bushing bolt.
^
Tighten to 90 Nm (66 lb-ft).