F 150 2WD V8-4.6L (2008)
Condenser HVAC: Service and Repair
CONDENSER CORE
Removal and Installation
1. Recover the refrigerant.
2. Remove the upper radiator sight shield.
3. Disconnect the condenser fittings.
-
Discard the O-ring seals.
-
To install, tighten to 25 Nm (18 lb-ft).
4. Position the transmission oil cooler aside.
-
Remove the 2 transmission oil cooler bolts.
-
Position the transmission oil cooler aside.
-
To install, tighten to 12 Nm (9 lb-ft).
5. Position the hood latch bracket aside.
-
Remove the 3 hood latch bracket bolts.
-
Position the hood latch bracket aside.
-
To install, tighten to 12 Nm (9 lb-ft).
6. Remove the 2 condenser bracket bolts.
-
To install, tighten to 18 Nm (13 lb-ft).
7. Remove the condenser core.