F 150 2WD V8-4.6L (2008)
Compass: Service and Repair
Compass Calibration
With Message Center
COMPASS CALIBRATION
With Message Center
1. NOTE: For optimum calibration, drive to an open, level location away from large metallic objects or structures. Switch off all non-essential
electrical accessories (rear window defrost, heater A/C, map lamps, wipers, etc.) and make sure all doors are closed.
Start the vehicle.
2. Locate the compass module at the base of the mirror.
3. NOTE: To exit the calibration adjustment mode before carrying out a compass adjustment, press the INFO button.
Press and hold the reset button on the LH top of the compass module until RESET FOR ZONE appears in the message center display.
4. NOTE: The message center display advances automatically to display the CIRCLE SLOWLY TO CALIBRATE message.
Slowly drive the vehicle in a circle no more than 5 times at no more than 5 km/h (3 mph) until CIRCLE SLOWLY TO CAL changes to
CALIBRATION COMPLETED in the message center.
Without Message Center
COMPASS CALIBRATION
Without Message Center
1. NOTE: For optimum calibration, drive to an open, level location away from large metallic objects or structures. Switch off all non-essential
electrical accessories (rear window defrost, heater A/C, map lamps, wipers, etc.) and make sure all doors are closed.
Start the vehicle.
2. Locate the compass module at the base of the mirror.
