F 150 2WD V8-4.6L (2008)
EGR Control Solenoid: Service and Repair
EXHAUST GAS RECIRCULATION (EGR) SYSTEM MODULE
Exploded View
Removal
1. Disconnect the EGR system module electrical connector.
2. Disconnect the EGR system module vacuum connector.
3. Disconnect the exhaust manifold-to-EGR system module tube from the EGR system module.
4. Remove the bolts, the EGR system module and the gasket. Discard the gasket.
Installation
1. CAUTION: Do not use metal scrapers, wire brushes, power abrasive discs or other abrasive means to clean the sealing surfaces. These
tools cause scratches and gouges which make leak paths. Use a plastic scraping tool to remove all traces of the old gasket.
Clean the EGR system module gasket mating surfaces.