F 150 2WD V8-4.6L (2008)
the end of the tube before inserting the tube into the connector.
-
Do not use any tools. The use of tools may cause a deformity in the clip components which may cause fuel leaks.
NOTE: During the repair or replacement of fuel-related components, all fuel liquid and fuel vapor openings must be capped, taped or otherwise
appropriately protected to prevent the ingress of dirt or other contamination. All caps, tape and other protective materials must be removed prior to
installation.
1. Release the locking tab on the quick connect coupling.
2. Separate the quick connect coupling from the fitting.
Connect - Type III
1. Inspect the quick connect coupling and the tube for damage. Remove any dirt or obstructions.
2. NOTE: Apply clean engine oil to O-ring seals.
Release the locking tab and install the quick connect coupling onto the fitting.
