F 150 2WD V8-4.6L (2008)
3. Install the U-washer.
1
Position the U-washer on the button end of the axle shaft.
2
Pull the axle shaft outward.
4. NOTE: If a new differential pinion shaft lock bolt is unavailable, coat the threads of the original differential pinion shaft lock bolt with threadlock
prior to installation.
Install the differential pinion shaft.
1
Align the hole in the differential pinion shaft with the differential case lock bolt hole.
2
Install a new differential pinion shaft lock bolt.
^
Tighten to 30 Nm (22 lb-ft).
5. Install the rear brake disc.
6. Install the differential housing cover.
