F 150 2WD V8-4.6L VIN 8 (2009)
Installation
1. Lubricate the new drive pinion seal with grease.
2. NOTE: If the new drive pinion seal becomes misaligned during installation, remove the drive pinion seal and install a new drive pinion seal.
Using the Drive Pinion Oil Seal Installer, install a new drive pinion seal.
3. Lubricate the pinion flange splines with axle lubricant.
4. NOTE: Disregard the scribe marks if a new pinion flange is being installed.
Align the pinion flange with the drive pinion shaft.
5. Using the Drive Pinion Flange Installer, install the pinion flange.
6. NOTICE: Install a new pinion nut with the same color as the original if not replacing the collapsible spacer. If a new collapsible spacer is
installed, install the nut in the kit or damage to the component may occur.
Position the new pinion nut.
