F 150 2WD V8-4.6L VIN W (2007)
Keyless Entry Key-Pad: Procedures
Keyless Entry Keypad
KEYLESS ENTRY KEYPAD
Removal and Installation
1. Remove the exterior front door handle.
2. Release the locking tabs and remove the keyless entry keypad.
3. To install, reverse the removal procedure.
Keyless Entry Keypad Code Programming
KEYLESS ENTRY KEYPAD CODE PROGRAMMING
1. NOTE: The permanent factory keyless entry keypad code cannot be erased.
Enter the permanent factory keyless entry keypad code.
2. Press the 1/2 button within 5 seconds to activate the programming mode. Holding the 1/2 button for more than 2 seconds after activation erases
the stored customer code. The door locks lock, then unlock, confirming the code is erased. The existing code does not need to be erased to
program a new customer code.
3. Within 5 seconds, enter the new 5-digit keyless entry keypad code. The door locks lock and unlock to confirm the new customer code is
programmed.
4. To exit the programming mode, wait 5 seconds.
