ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Remote Keyless Entry Transmitter Programming|Page 7174 > < Remote Keyless Entry Transmitter Programming|Page 7172
Page 1
background image

Keyless Entry Transmitter: Service and Repair
Door Latch Remote Control - SuperCab

DOOR LATCH REMOTE CONTROL - SUPERCAB

Removal and Installation

1. Remove the rear door trim panel.
2. Position the watershield aside.
3. Remove the 3 upper door latch bolts.

-

To install, tighten to 12 Nm (9 lb-ft).

4. Remove the 3 latch remote control assembly bolts.

-

To install, tighten to 12 Nm (9 lb-ft).

5. Remove the 3 lower door latch bolts.

-

To install, tighten to 12 Nm (9 lb-ft).

6. Release the actuating rod from the rear door interlock.
7. Remove the latch remote control assembly.
8. To install, reverse the removal procedure.

-

Lubricate the upper and lower rear door latches after installation.

Remote Keyless Entry Transmitter Programming|Page 7174 > < Remote Keyless Entry Transmitter Programming|Page 7172