ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Body - L/H Cowl Panel Popped Up|Page 7704 > < Body - L/H Cowl Panel Popped Up|Page 7698
Page 1
background image

Cowl Moulding / Trim: All Technical Service Bulletins
Body - L/H Cowl Panel Popped Up

TSB 08-25-5

12/22/08

DRIVERS SIDE COWL PANEL POPPED-UP

FORD:
2004-2008 F-150

LINCOLN:
2006-2008 Mark LT

This article supersedes TSB 07-24-5 to update the Service Procedure.

ISSUE
Some 2004-2008 F-150 and 2006-2008 Mark LT (Excluding Heritage) vehicles may encounter a concern of the windshield cowl panel not being fully
seated, popped up or giving the appearance of being warped.

ACTION
Follow the Service Procedure steps to correct the condition.

SERVICE PROCEDURE

NOTE

HEAVY-PRESSURE MAY RESULT IN BREAKING OF THE J-HOOK.

1.

Attempt to seat the cowl panel by gently applying pressure, first downward, then rearward to the inboard rear area of the cowl panel, forward of
the windshield to determine if it will engage the sheet metal flange below. (Figure 1)

Body - L/H Cowl Panel Popped Up|Page 7704 > < Body - L/H Cowl Panel Popped Up|Page 7698